INTERNATIONAL OK DINGHY CLASS ASSOCIATION
The following amendments to the Class Rules have been approved to be
effective 26 April 2010
Current Rule :
12.5 Weight
The mast spar weight including all fixed fittings and the halyard in
their normal racing position and in dry condition shall be not less than
8kg. Lead corrector weights totalling not more than 0.6kg
permanently fixed above deck to the exterior face of the spar are
permitted.
Amended Rule :
12.5 Mast Spar Weight
The mast spar weight including, mast base, deck bearing, halyard,
cleats, blocks, any corrector weights and excluding the goose neck
pin, all in dry condition shall be not less than 8kg.
Corrector weights totalling not more than 1.5kg, permanently fixed to
the external surface of the spar are permitted.
En comparaison le poids actuel du mât de Finn plus haut et profilé en aile est à 8 kg, celui de l’Europe étant à 5,5 Kg.
.
Current Rule :
12.3 Fittings
With the exception of wooden spars, the boom shall be attached to the
spar by a fixed fork fitting. The width between the arms of the fork shall
be 36mm +/- 4mm. The boom pinholes shall be 16mm +/- 2mm in
diameter. The centre of the holes shall be situated 37mm +/- 2mm aft of
the aft face of the spar and 35mm +/- 2mm below the lower point.
Amended Rule :
12.3 Fittings
With the exception of wooden spars, the boom shall be attached to the
spar by a fixed fork fitting. The width between the arms of the fork shall
be 36mm +/- 4mm. The boom pinholes shall be 16mm +/- 2mm in
diameter. The centre of the holes shall be situated 37mm +/- 2mm aft of
the aft face of the spar and 35mm +/- 2mm below the lower point. The
bottom mast bearing may be made of any material.
Cela ne va malheureusement pas du tout dans le sens de la standardisation, principal défaut de la Yole-OK
